The KN95 mask employs a fine mesh of synthetic polymer fibers specifically made with a nonwoven polypropylene fabric. It is produced by melt blowing and forms the inner filtration layer system that filters out hazardous particles. Enjoy peace of mind one of the highest protective classes KN95. Each respirator mask features maximum protection from droplets. dust, bacteria, germs. smoke. and more. KN95 masks are indicated for use when treating patients with airborne diseases such as TB or influenza. The multi-layer design reduces the spread of infections with a 0.3 Most Penetrating Particle Size (MPPS) rating of 95%. This mask has a fluid resistance penetration measurement of 160mm Hg. The CDC reports that prolonged KN95 mask use (including between patients) can be safe for up to 8 hours. Discard the mask if it is wet or dirty on the inside. if it is deformed, or if the filter is torn. A KN95 mask cannot be cleaned or disinfected.
Compliant with FFP II, III, FDA
- Unused masks should be kept in a sealed box and stored in a dry place, free of contaminants.
- Do not use in temperatures over 50°C or under -5°C.
- Made in China.
||10 pcs | 21cm/11cm/7cm
||5-layer fine mesh of synthetic polymer fibers, with a nonwoven polypropylene fabric
||Under 50°C / above -5°C
||KN95 (MPPS) 160mmHg
i. 3.0 Microns: Bacteria Filtration Efficiency standard (BFE).
ii. 0.1 Microns: Sub-micron particulates Filtration Efficiency standard (PFE).
iii. 0.3 Microns: Used to represent the most-penetrating particle size (MPPS), which is the most difficult size particle to capture.
iv. Fluid Resistance: Mask resistance to penetration by synthetic blood under pressure (mmHg).
Shipping & Dimension:
6 x 8.5 x 5 in, 0.275lbs
|Recycled Content: 0%
||Greenhouse Gas Decrease: 4.00 lbs